SBE SB-36 - Page 8

SBE SB-36 OPERATION MANUAL
1.2.3 Receiver
Sensitivity 0. 5 microvolts for 10 db S+N/N
Selectivity 2.4 kHz @6 db
4.2 kHz @60 db
Spurious Response Image and IF responses down at least 50 db
Stability 100 Hertz (or less) per 1/z hour under any normal
ambient condition
Audio Output 2. 5 watts @ 10% distortion
Speaker 8 ohms, built into accessory AC Power Supply
unit. Rear panel jack provided for external
speaker.
Noise Blanker IF type, switchable from front panel.
Receiver Incremental Tuning
(RIT)
±7 kHz, nominal
Power Consumption 100 watts
Front Panel Meter Calibrated in "S" units
Ear Phones Jack on front panel. 600 ohm output.
NoobowSystems Lab. Tomioka, Japan 2003 http://www.noobowsystems.com/ Page 8 / 56