TECHNICAL DATA
3
Installation
The house owner is responsible for ensuring that all necessary national and local safety measures are observed during installation and fitting
and also responsible for observing the fitting and operating instructions detailed in this manual.
When you install any kind of fireplace or stove, you must inform the local authorities. You are also responsible for calling in a chimney sweep to
inspect and authorize the installation.
To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Our Scan Dealer will be able to
recommend a qualified fitter in your area. For information on Scan Dealers, please go to www.scan.dk.
Safety
Any changes made to the product by the dealer, installer or user could result in the product and safety functions not functioning as intended.
The same applies to the fitting of accessories or extra equipment not supplied by Scan A/S. This could also be the case if parts that are necessary
for the operation and safety of the stove are dismantled or removed.
The Scan 64 - series range comprises:
Scan 64-1: Stove with steel sides
Scan 64-2: Stove with steel sides and side windows
Scan 64-3: Stove with soapstone sides
Scan 64-4: Stove with soapstone sides and side windows
Scan 64-5: Stove with aluminium sides
Scan 64-6: Stove with aluminium sides and side windows
Scan 64-3
Scan 64-1 Scan 64-2
Scan 64-6
Scan 64-4 Scan 64-5
To Next Page
Loading...
