OPM 200 en-GB 28
©
Scania CV AB 2014, Sweden
Inspection
Inspection
The inspection programme covers a number of
points that are divided into the following sec-
tions:
• Lubrication system
• Cooling system
• Air cleaner
• Fuel system
• Miscellaneous
Block the starting device when working on the
engine. If the engine starts unexpectedly, there is
a serious risk of injury.
The inspection programme includes the follow-
ing inspections:
• S inspection: Minimum basic inspection.
• M inspection: More extensive inspection.
• L inspection: Includes nearly all inspection
points.
• XL inspection: Includes all inspection points.
During a period, the sequence is S-M-S-L-S-M-
S-L-S-M-S-XL.
XL
6000
S
5500
M
5000
S
4500
L
4000
S
3500
M
3000
S
2500
L
2000
S
1500
M
1000
S
500
313 153
On delivery a Scania engine is optimised for its
application. However, regular inspection is nec-
essary to:
• prevent unplanned stops
• extend the service life of the engine
• maximise the long-term emission perfor-
mance of the engine
• give the best possible operating economy.
Property of American Airlines
To Next Page
