Scania DC13 072A - Renewing the Fuel Filter

OPM 200 en-GB 57
©
Scania CV AB 2014, Sweden
Fuel system
Renewing the fuel filter
Engines with XPI have dual fuel filters in the
form of a water separating suction filter and a
pressure filter.
Removing
Environment
Avoid spillage and use a suitable container. Used
fuel must be disposed of as specified in national
and international law.
To ensure that the filter housings are drained
properly, the filter covers must be removed as
follows:
IMPORTANT!
Start with the water separating suction filter (A)!
Do not open the pressure filter cover (B) until the
filter housing for the water separating filter (A) is
completely drained.
Tool No. Designation Illustration
588 475 Socket
588 793 Suction tool
118 268
337 297
329 083
BA
A Water separating suction filter
B Pressure filter
Property of American Airlines