Scania DC13 072A - Technical Data; General Data; Lubrication System

OPM 200 en-GB 80
©
Scania CV AB 2014, Sweden
Technical data
Technical data
General data
Lubrication system
Number of cylinders and configuration 6, straight
Working principle 4-stroke engine
Cylinder diameter (mm/in) 130/5.12
Piston stroke (mm/in) 160/6.30
Displacement (dm
3
/in
3
)
12.7/775.0
Firing sequence 1 - 5 - 3 - 6 - 2 - 4
Compression ratio
DC13 072/073A 16.3:1
DC13 074/076/077/071A 17.3:1
DC13 084/085/087/089A 17.5:1
DC13 078/080/081/082/083A 18:1
Engine direction of rotation viewed from rear Anti-clockwise
Fan direction of rotation viewed from front Clockwise
Cooling Coolant
Valve clearances, cold engine
Intake valve (mm/in) 0.45/0.018
Outlet valve (mm/in) 0.70/0.028
Number of teeth on the flywheel 158
Low idling speed (rpm) 600-750
Maximum full-load speed (rpm) 2,100
Fuel Diesel
Approximate weight, without coolant and oil (kg/lb)
DC13 084/085/087/089A 1,075/2,370
Other engine types 1,050/2,315
Oil volume See Inspection
Oil cleaning Centrifugal oil cleaning
Oil cooler Coolant cooled, full flow
Oil filter Paper filter from Scania
Interval between oil changes (h) 500
Oil pressure (bar)
Normal with the engine at operating temperature, operating
speed
3-6
Minimum permitted at idling speed 0.7
Crankcase pressure with closed crankcase ventilation (mbar) -5.4 to 2.0
Property of American Airlines