The coffee brewer requires ventilation. See “TopBrewer-Pro_Installation-Overview”. The grating must
be inspected frequently and vacuum-cleaned. If the installation site/environment is especially dusty
there must be vacuum-cleaned each month.
Note:
Before connecting the coffee brewer draw off some buckets of water by means of the hose (to clean
the pipes and to avoid a disagreeable taste). This procedure is also recommended when the brewer has
not been operating for a longer period of time.
Note:
We recommend that the brewer be switched on permanently due to the ventilation system among
others.
Note:
The A-weighted noise pressure level of this appliance is less than 70 dB.
Note:
Coffee brewers equipped with steam generator (fresh milk system) must have a scale controller filter
in the water supply line.
To Next Page
Loading...
