Scantech KSCAN-Magic - 3 Software Installation; 3.1 Computer Configuration Requirements

11
3 Software installation
This product needs to install the scanning software ScanViewer. The following
mainly explains the operating environment and installation steps required by the
software.
3.1 Computer configuration requirements
The scanning software performs real-time processing on the scan data
transmitted in real time during the scanning process, and selecting the
appropriate hardware configuration can effectively improve the working
efficiency of the entire scanning system. Refer to Table 3-1 for the computer
parameter configuration requirements for installing the scanning software.
Table 3- 1 Computer parameter configuration requirements
Project
Recommended configuration
CPU
Intel Xeon W-10885M @ 2.40GHz
RAM
32G DDR4 3200MHz
Memory
Nvidia Quadro RTX 3000，Independent 6G
Interface mode
USB3.0
Operating system
Win10 Pro
The software installation packages to be installed before the device is used is
Scanner X.X.X - MagicXX.exe.
Notice
X.XX in 3D Scanner X.XX.exe is the software installation package
version number. The version number may be changed later due to
software upgrade. It is subject to change without notice.