EasyManua.ls Logo

Scantech KSCAN-Magic - Storage Announcements; Laser Safety

Scantech KSCAN-Magic
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
V
The device emits smoke or an unusual smell.
Storage Announcement
Attention
Do not wipe the product with a damp cloth, volatile oil, thinner,
etc. Otherwise, the product may be discolored or deformed.
When the soil is dirty, use a cotton cloth to remove the diluted
neutral detergent, wring it out, wipe it, and then wipe it off with a
soft cloth.
Please try to avoid the following places for storage
high humidity or dust
Corrosive or flammable gas.
Laser Safety
The laser wavelengths of the KSCAN-Magic/Magic II are as follows:
Type
KSCAN-Magic/Magic II
Blue wavelength
450nm
Laser Output, Pavg: <1mW
Infrared wavelength
850nm/940nm
Laser Output, Pavg: <1mW
Green wavelength
520nm
Laser Output, Pavg: <1mW
This product is classified as Class 2M Laser Product according to IEC 60825-1.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
Caution: Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.