Need help?Do you have a question about the Scantech KSCAN-Magic and is the answer not in the manual?
General description of handheld 3D scanner components and functionality.
Overview of different KSCAN scanner series and their capabilities.
Explanation of how the KSCAN scanner acquires 3D data using binocular vision.
Lists and describes the standard items included with the KSCAN 3D scanner.
Identifies and explains the various structural components of the scanner.
Step-by-step guide on connecting the scanner to a computer and power supply.
Specifies the hardware and OS requirements for installing the scanning software.
Detailed instructions for installing the ScanViewer scanning software.
Guidance on how to uninstall the scanning software from the system.
Steps to configure software permissions and graphics card settings for optimal performance.
Instructions for managing license and configuration files for the scanning software.
Guide to selecting the appropriate working mode based on the object being scanned.
Detailed steps for performing photogrammetry scanning, including targets and ruler placement.
Outlines the steps involved in the actual 3D scanning operation.
General| Accuracy | 0.020 mm |
|---|---|
| Resolution | 0.010 mm |
| Operating Temperature | 0°C to 40°C |
| Interface | USB 3.0 |
| Type | Handheld 3D Scanner |
| Technology | Laser + Photogrammetry |
| Data Output | STL, OBJ, ASC, PLY |
| Scan Speed | 1, 350, 000 points/s |
| Light Source | Laser |
| Operating Humidity | 10% to 90% (non-condensing) |
| Software Compatibility | ScanViewer |
| Working Distance | 300 mm |
To Next Page