78 Appendices
Appendix N SG-15
Colour
Control Bar Codes
To make live easier for those who test, install and maintain the SG-15
Colour
,
we have implemented four Control Barcodes in the Shuttle:
Reboot:
Will reboot the SG-15
Plus
Back to Default:
Load default parameter set
Reboot to LAN:
• For WiFi testing purposes only.
• Reboots the SG-15 using LAN as
the active interface to configure
a WiFi unit.
Show the SG-15 status
*1
See explanation on the next
page.
To Next Page
Loading...
