Need help?Do you have a question about the Scantech V-1020BT and is the answer not in the manual?
General| Brand | Scantech |
|---|---|
| Model | V-1020BT |
| Category | Barcode Reader |
| Language | English |
Essential safety guidelines and precautions for using the scanner to prevent damage or injury.
Information regarding FCC compliance and potential interference from the device.
Details on product labels, including model, serial number, and compliance marks.
Overview of the scanner's features, connectivity, and basic operation for reading barcodes.
Instructions for unpacking the scanner and verifying the shipment contents.
Steps for physically connecting the scanner to a POS or HOST system.
Guidance on downloading and installing the necessary USB driver for operation.
Instructions for unpacking the Bluetooth scanner and verifying the shipment contents.
Steps for setting up the charging cradle for the Bluetooth scanner.
Procedures for establishing Bluetooth connectivity between the scanner and cradle.
Information on customizing the scanner's cover display with commercial messages.
Introduction to scanner configuration methods using programming codes or utility tools.
Details on using the advanced Utility Tool for scanner configuration and setup.
Overview of the default configuration settings for the scanner.
Procedure to reset scanner parameters to their original factory default settings.
Settings related to RS-232 communication, including Baudrate, Data bits, and Parity.
Programming code to set the scanner's operating mode to USB.
Configuration options for the scanner's Bluetooth functionality and settings.
Setup instructions for the Bluetooth cradle interface and parameters.
Options for enabling or disabling various barcode symbologies for scanning.
Settings specific to EAN and UPC barcode reading, including reading types and check digits.
Configuration options for Code 11 barcodes, such as check digit transmission and length.
Settings for Code 39 barcodes, including type, check digit transmission, and length.
Configuration options for Code 93 barcodes, including setup for code length.
Settings for Code 128 and EAN 128 barcodes, including code length and identifier inclusion.
Configuration for Interleaved 2 of 5 barcodes, covering check digit and code length.
Settings for MSI barcodes, including check digit transmission and code length.
Settings for symbology identifiers and other miscellaneous scanner configurations.
Configuration options for Plessey barcodes, including check digit transmission and code length.
Configuration of data prefixes (preambles) and suffixes (postambles) for scanned data.
Adjustments for scanner performance, including imager mode, triggering, and beep tones.
To Next Page
