14 Installation of the VEGA V-1020
3.1 UNPACKING
Unpack the
VEGA as follows:
1. Take the VEGA and its accessories out of the box.
2. Remove the packing material.
3. Check the packing list to make sure you have received all of the items
ordered.
Standard Shipment Package
a. VEGA Area Imager Handheld Bar code Scanner
b. Communication Cable (RS-232 or USB)
c. Power Supply (if applicable)
d. Quick Start Guide
e. Stand
f. Transparent Cover Plate
4. Visually inspect the VEGA and accessories for any evidence of physical
damage.
5. If anything is missing or appears to be damaged, immediately contact your
dealer.
ATTENTION
Store the packing material and boxes: it should be used whenever
the VEGA is transported for servicing.
To Next Page
Loading...
