70 Programming Codes
7.16 PREAMBLES AND POSTAMBLES
7.16.1 Preamble
The scanner can be programmed to output Bar code data according the following
format: [PREAMBLE STRING] [BAR CODE DATA]
Example:
To send a <STX> in front of the bar code, scan only programming code <STX>.
As a result, the scanner will give the following bar code output:
[<STX>] [BAR CODE DATA]
Preamble <None>
<STX>
It could be possible that you need other Preambles, in that case please use VEGA
Utility tool or contact Scantech-ID Technical Support Department.
To Next Page
Loading...
