4 -
1 Basic Operation
1.1 Button Explanation
Start Button:
When compressor is at stop status, press this button to start the compressor
When compressor is set as master (No.1) in block mode, press this button to start the compressor and
activate block mode function at the same time
Stop Button:
When the compressor is at running status, press this button to stop the compressor
When compressor is set as master (No.1) in block mode, press this button to stop compressor and block
mode function as well
When compressor is at stop status, long press this button to display software edition
Set Button /Loading / unloading Button:
When the compressor is at running status, press this button to load, unload
When the compressor is at setting mode, press this button after modification to confirm and save the
modified data
To Next Page
Loading...
