SCC MAM – 890 - User Parameter View and Modification

04.08.2017 Operation Manual MAM - 890 V1.0
-
7 -
1.5 User Parameter View and Modification:
FACTORY PARAMETER is not allowed to be modified in running and stop delay status.
In first menu press or to move the cursor to the “USER PARAMETER”.
Press to switch to the following menu
Move the cursor to the “P, T SET”, then press to switch to secondary menu
User can check the CUSTOMER PARAMETER in this menu or press to switch to the following menu
which requires a user password input
SET P、
SET TIME
LOADING P: 0.8MPa
UNLOADING P: 0.6MPa