8 -
In this menu the first data bit of password blinking, press or to modify the first bit of password.
Press move the cursor to the next data bit, modify the second data bit of password in accordeance with the
above. Modify the the third and fourth data of password in sequence, press to confirm the input data and
the menu will switch to the following menu after verification.
The upper right corner
with “*” indicates the
system verification
of the password
In the menu above press , the first data of LOADING P start to blink, user can press or to modify
the present data in accordance with the above method. Press to move to next data bit and modify the
target data in sequence. When finished press to confirm and save the data. The controller sends out a short
sound to tip the completion of parameter set.
Other CUSTOMER PARAMETER share the similar way for modification.
NOTE: Customer password can be set in CUSTOMER PARAMETER
and is set as 1688.
ENTER PASSWORD
****
To Next Page
Loading...
