- 13 -
www.SCEPTRE.com
SCEPTRE C Series UHD Display User Manual
This HDMI also supports ARC (audio return channel) / CEC (consumer
electronics control) functions (no audio return channel). HDMI connects to
devices that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable
/ satellite set-top box. This connection port receives pure digital audio and
high definition signal through one single cable. This port also can accept a
HDCP video device for video such as PC.
7. HDMI 1 (ver. 2.0 / MHL) – HDMI 1 houses a HDMI version 2.0 connection.
Under ultra HD 4K x 2K resolution this connection supports 60 Hz refresh
rate and HDCP 2.2. This HDMI also supports CEC (consumer electronics
control) functions including audio return channel. HDMI connects to devices
that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable /
satellite set-top box. This connection port receives pure digital audio and high
definition signal through one single cable. This port also can accept a HDCP
video device for video. HDMI 1 also doubles as the MHL connection for cell
phones. MHL is a protocol where the display will display what your cell phone
displays. If your cell phone supports MHL you can purchase a MHL cable
from any electronic store and connect it to HDMI 1 and also your cell phone.
Make sure the display’s source is changed to HDMI 1 and turn on your cell
phone. You should see an image of your cell phone screen. This HDMI also
supports CEC (consumer electronics control) functions (no audio return
channel).
8. TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check http://www.antennaweb.org
.
9. USB – USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the display’s firmware.
Please Note:
• This display features a power saving function which will turn off the
display automatically after 10 minutes of idling on a connection with no
signal. This feature is present on all connection.
• TV tuner is an optional item for this display.
To Next Page
Loading...
Need help?
General
