Sceptre C Series User Manual

- 18 -
www.SCEPTRE.com
SCEPTRE UMR Series UHD Display User Manual
Connecting DVD Player with Component YPbPr…
1. Make sure the power of UHD display and your DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your DVD player
and YPbPr’s green connector port on the back of your UHD display.
3. Connect the blue color connector to both your DVD player and YPbPr’s blue connector
port on the back of your UHD display.
4. Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your UHD display.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player
and YPbPr’s white connector port on the back of your UHD display.
6. Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your UHD display.
7. Turn on the UHD display and your DVD player.
8. Use the remote control’s source button or the source button on the display to switch to
YPbPr.
Please Note:
• Sometimes DVD players will not automatically output to YPbPr. You will
need to configure your DVD player with AV connection first then switch to
YPbPr. Please reference the DVD player’s manual, to make sure the DVD
player is configured to output correctly to the display.
•
This source shares audio jacks with composite video.

Sceptre C Series Specifications

General

Brand	Sceptre
Model	C Series
Category	HDTV
Language	English