Sceptre C24 Series - Connections; If You have HDMI Connection on Your Video Card

- 16 -
www.SCEPTRE.com
SCEPTRE C24 Display User Manual
Connections
If You have HDMI Connection on Your Video Card…
1. Make sure the power of the C24 LED MONITOR is turned off.
2. Obtain an HDMI cable and connect one end to the back of the monitor
and the other end to the back of the computer.
3. For audio, you can plug in a set of headphones or speakers into the
headphone jack.
4. Turn on the power of both the C24 LED MONITOR and the computer.
Please Note:
• HDMI ports support Adaptive Sync only.
• HDMI 1-2 supports up to 100Hz refresh rate.
• At the optimal resolution of 1920 x 1080, the supported maximum
refresh rate is 100Hz for HDMI.