- 8 -
www.SCEPTRE.com
SCEPTRE C24 Display User Manual
Opening the Package
The SCEPTRE display is packaged in a carton. The size and weight of the product
might be too heavy for 1 person to handle. In the event of that happening, it is
recommended that the display package must be handled by a minimum of 2 or more
persons. Since the glass can be easily scratched or broken, please handle the product
gently. Never place the unit on a surface with the glass facing downwards unless it is on
a protective padding. When opening the carton, check that the product is in good
condition and that all standard accessories and items are included. Save the original
box and all packing materials for future shipping needs.
Package Contents
SCEPTRE Display x 1
Display Base x 1
Display Neck x 1
Neck Screws x 2 (M4 x 10mm)
Neck Screw Rubber x 1
SCEPTRE Screwdriver x 1
HDMI Cable x 1
Power Adapter x 1
User Manual x 1
Installation
Please read the user manual carefully before performing the installation. When an
extension cord is required, use one with the correct power rating. Use only the Sceptre-
provided power cable or AC adapter approved for use with this device. The product
should be installed on a flat surface to avoid tipping. Space should be maintained
between the back of the product and the wall for proper ventilation. Avoid installing the
product in the kitchen, bathroom, or other places with high humidity, dust, or smoke, so
as not to shorten the service life of the electronic components. Please ensure the
product is installed with the screen in landscape orientation. Any 90° clockwise or
counterclockwise installation may induce poor ventilation and subsequent component
damage.
To Next Page
Loading...
Need help?
General
