Sceptre C24 Series User Manual

- 9 -
www.SCEPTRE.com
SCEPTRE C24 Display User Manual
Installing the Monitor Stand Assembly
1. Insert the neck into the base with the front of the neck facing the left at 45-
degree angle and twice the neck clockwise until you hear a click sound and
the neck is facing forward aligned with the base.
2. Install the assembled stand to the back of the monitor and screw in the 2
neck screws to secure the stand to the monitor.
3. Insert the rubber cover to the back of the neck.
4. To finalize your installation of the display, please read the following:
a. If you are placing the display on a stand, we would recommend
using a display safety strap (not included) to minimize the
possibility of the display toppling over.
b. Securely install all screws and connections.

Sceptre C24 Series Specifications

General

Brand	Sceptre
Model	C24 Series
Category	Monitor
Language	English