Sceptre UMC Series User Manual

- 12 -
www.SCEPTRE.com
SCEPTRE UMC Series UHD Display User Manual
Side Control Buttons
1. VOL(+) – This button increases the display’s volume. If a sub-menu is active,
pressing this button will move the select right.
2. VOL(-) – This button decreases the display’s volume. If a sub-menu is active,
pressing this button will move the selection left.
3. CH(▲) – This button changes the display channel up. If the OSD is active, this
button functions as up for the menu.
4. CH(▼) – This button changes the display channel down. If the OSD is active, this
button functions as down for the menu.
5. – This button activates the On Screen Display (OSD). If a sub-menu is active,
pressing this button will exit the OSD.
6. – This button switches between all the different sources of the display. When
the OSD is active, this button acts as the enter button and confirms the menu
selection.
7. – Turn on the display by pressing the button once. Press the button again to
turn off the display.

Sceptre UMC Series Specifications

General

Brand	Sceptre
Model	UMC Series
Category	Monitor
Language	English