Sceptre UMC Series - Connecting Devices (Continued); Connecting Cable;Satellite Box via HDMI

- 21 -
www.SCEPTRE.com
SCEPTRE U Series CV-UMC UHD TV User Manual
Connecting Cable or Satellite boxes with HDMI…
1. Make sure the power of UHD display and your set-top box is turned off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the other
end to the HDMI port on the back of your UHD display.
3. Turn on the UHD display and your set-top box.
4. Use the remote control’s source button or the source button on the display to
switch to HDMI.
Please Note:
 Please reference the set-top box’ manual, to make sure the set-top
box is configured to output correctly to the display.
 Sceptre’s UHD display supports SONY’s universal remote
code. Please look up SONY’s codes in your universal remote’s
hand book.