Sceptre UMR Series User Manual

- 25 -
www.SCEPTRE.com
SCEPTRE UMR Series UHD Display User Manual
–
OSD (On Screen Display) Controls
Via Remote Control
In order to adjust most of the options inside the On Screen Display (OSD), the picture
below shows all the buttons used on the remote control.
– This button opens the
OSD and also exits the OSD
by going to the previous
level of the OSD.
– This button exits the OSD
entirely.
▲ – This button changes functions as
up direction in the OSD.
▼ – This button functions as down
direction in the OSD.
◄ – This button functions as left
direction in the OSD.
► – This button functions as right
direction in the OSD.
ENTER – This button changes the
channel in conjunction with the
number pad and also functions as
ENTER for selecting options in the
OSD.
Via Display Side Panel Buttons
In order to provide more than one type of OSD control buttons, the side panel’s buttons
have also been made functional for adjusting the OSD.
1. VOL(+/-) – These buttons functions as left/right direction in the OSD or
increases/decreases the value of an option.
2. CH(▲/▼) – These buttons functions as up/down direction in the OSD.
3. – This button opens the OSD and also exits out of menus.
4. This button acts as the enter button to enter each function or option.

Sceptre UMR Series Specifications

General

Brand	Sceptre
Model	UMR Series
Category	Monitor
Language	English