S
Sherri SchneiderSep 1, 2025
What to do if my Sceptre X328BV-SR picture is too dark?
- KKayla ShawSep 2, 2025
If the picture on your Sceptre Monitor is too dark, adjust the contrast, brightness, and lamp settings via the OSD Menu.
To Next PageTo Next PageWhat to do if my Sceptre X328BV-SR picture is too dark?
If the picture on your Sceptre Monitor is too dark, adjust the contrast, brightness, and lamp settings via the OSD Menu.
Why does my Sceptre X328BV-SR Monitor turn off automatically after 10 minutes?
Your Sceptre Monitor turns off automatically after 10 minutes because it features a power-saving mode that activates when there is no signal for more than 10 minutes.
How to make the picture cover the entire screen on my Sceptre X328BV-SR Monitor?
If the picture doesn't cover the entire screen on your Sceptre Monitor: * If using HDMI or a digital channel, use the ASPECT button to switch to 16:9 format. * If using VGA, use the AUTO ADJUST function. * If using a regular analog channel, AV, or component in 480i resolution, use the ASPECT button to switch to 16:9. Note that this may distort the picture.
Why can't I get 1360x768 resolution on PC VGA with my Sceptre Monitor?
If you cannot get 1360x768 resolution on PC VGA with your Sceptre Monitor, first ensure the display is recognized as a plug and play monitor. If that doesn't work, try updating your video card’s drivers. If the issue persists, you may need to upgrade your video card.
Why is there no audio with HDCP video on my Sceptre X328BV-SR Monitor?
If there's no audio with HDCP video on your Sceptre Monitor, ensure a 3.5 mm mini-jack cable is connected from your HDCP video device’s sound output to the display’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need an RCA audio converter to a 3.5 mm mini-jack cable.
Why is there no sound on my Sceptre X328BV-SR Monitor when connected to a PC?
If there's no sound on your Sceptre Monitor when connected to a PC, ensure you have a 3.5 mm mini-jack cable connected from your PC’s sound output to the display’s VGA STEREO INPUT.
Why is there audio only, but no picture on my Sceptre Monitor?
If your Sceptre Monitor is producing audio but no picture, ensure that both your video and audio cables are connected. If you're using a TV tuner, make sure the signal strength is at least 65%.
Why is there no audio on my Sceptre X328BV-SR Monitor, but I can see the picture?
If you see a picture but hear no audio on your Sceptre Monitor, first ensure the audio cable is properly connected. Also, readjust the volume using the remote control. If you are using a TV tuner, the signal must be at least 65%.
General| Screen Size | 32 inches |
|---|---|
| Panel Type | LED |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 3000:1 |
| Response Time | 5 ms |
| Built-in Speakers | Yes |
| HDMI Ports | 1 |
| Ports | HDMI, VGA |
| Viewing Angle | 178° horizontal, 178° vertical |
| VESA Mount Compatible | Yes |
| Resolution | 1920 x 1080 (Full HD) |
