Installation and commissioning
Standard allocation set at the factory
1) Mil
k 5) Lungo 9) HW small
2) Milk foam / Autosteam 6) Café small / Ristretto 10) HW large
3) Ristretto 7) Café Crème / Espresso 11) Milk foam / Basicsteam
4) Espresso 8) Pott / Lungo
The allocation is the same as the standard allocation set at the factory. The left brewing group is preconfigured for espresso beverages, and the
right brewing group for Café crème beverages. However, this standard allocation applies only for Germany, Switzerland, and Austria. For
international machines, both brewing groups are preconfigured for espresso beverages.
Because the beverage buttons on this machine are permanently assigned to the grinder above them, customer clarification is required in advance
with respect to what type of bean should be used in which bean hopper, or which beverages should be dispensed with which brewing group.
Only when this is complete can the beverage and recipe settings be made (see the document "Basic beverage settings").
To Next Page
Loading...
Need help?
General
