BASCAP_BF_EN
V04 | 08.2019
35
www.schaerer.comOperation
The beverage is dispensed.
► Remove the cup after the beverage has been dispensed.
Hot water
Dispensing of hot water can be preset as follows using the SERVICE card:
• [Hot water] button with the "Start-stop" function.
• [Hot water] button with the "Press and hold" function.
• [Hot water] button with the "Double beverage" function.
► Place a cup under the hot water outlet.
► Press the [Hot water] button or press it and keep it held down.
► Remove the cup after the beverage has been dispensed.
There is a risk of burns at the hot water outlet during hot water dispensing.
Do not touch the hot water outlet.
Milk beverages
► Place a cup under the beverage outlet.
► Press the desired beverage button.
► Remove the cup after the beverage has been dispensed.
Flavoured beverages
CAUTION!
Risk of machine
damage!
Improper use can damage the machine.
Never use the Flavour Point to dispense anything other than syrup or spirits.
Option 1: Select aroma
► Place a cup against the cup stop under the beverage outlet.
► Press the desired beverage button.
The selection screen is displayed.
► Select an aroma.
► Select Regular or Decaf coffee.
► Press the [Make my beverage!] field.
The selected combination is dispensed.
The beverage overview is once again displayed.
► Remove the cup after the beverage has been dispensed.
Option 2: Predefined beverages
► Place a cup against the cup stop under the beverage outlet.
► Press the desired beverage button.
► Remove the cup after the beverage has been dispensed.
To Next Page
Loading...
