www.schaerer.com Programming
BASCAP_BF_EN
V04 | 08.2019
62
Settings for the desired beverage are displayed.
► Make the setting.
► Save the setting.
The beverage settings contain the following menu items:
• Coffee settings
• Milk mix settings
• Milk settings
• Foam settings
• Milk powder settings
• Choco settings
• Hot water settings
• Cup warmer settings
• Steam settings
• Flavour settings
Dispensing a test beverage
To check settings for a beverage, a test beverage can be dispensed in the Individual beverage
settings.
► Place a suitable container below the beverage outlet.
► Press the field.
► Depending on the beverage, the size can be selected.
The beverage is dispensed with the previously chosen parameter settings.
Once the product has been dispensed, the dispensing and brewing times are dis-
played.
Coffee settings
The contents of these menu items are described in this section.
Any changes made become active after: 1) the save button has been pressed, 2) the CHEF
card has been removed, and 3) the software has been automatically reloaded (during start-
up).
Parameters: Coffee settings
Display text Setting range Description
Grind quantity 4-16 g
Standard values are:
9.5 g (Ristretto)
9.5 g (Espresso)
9.0 g (Coffee)
9.0 g (Cappuccino)
9.0 g (Latte)
8.5 g (L.macchiato)
9.0 g (Chociatto)
9.0 g (White Americano)
9.0 g (Americano)
Lower limit 4 g:
When beverages with less than 4 g coffee are vended, the
brewing unit becomes soiled very quickly.
Upper limit 16 g:
The maximum quantity of coffee that will fit into the brewing
chamber.
To Next Page
Loading...
