Schaerer Coffee Art

www.schaerer.comCleaning
Operating instructions / V04/01.2012
51/76
Bean hopper
Do not use abrasive cleaning products.
► Lock the bean hopper.
► Remove remaining beans with the vacuum cleaner.
► Remove bean hopper.
► Thoroughly rinse out the bean hoppers under running water (mixed with soap, if needed) and clean with a
soft cloth. Remove any stubborn remains using a brush.
► Replace the bean hopper.
Optional accessories
Cup warmer (option)
Do not use abrasive cleaning products.
► Switch off the cup warmer with switch
1
.
; Wait for the cup warmer to cool.
► Clean the cup levels weekly or as needed with a moist cloth.
Cup & Cool (option)
See "Side cooling unit and milk container", page 47.
Thawing cooling Unit
Defrost the cooling unit weekly, or when the ice layer exceeds 3 mm. Do not remove the ice layer
using sharp or pointed objects. This could damage the inside of the cooling unit.
Cup & Cool
► Switch off the cooling unit using the on/off switch
2
.
► Leave the door open.
► Wipe up the condensate using a soft cloth.
► Close the door before switching the machine on.
CAUTION!
Risk of machine
damage!
CAUTION!
Risk of machine
damage!
1
CAUTION!
Risk of machine
damage!
2