Schaerer Coffee Art

www.schaerer.com
38
BASCA - EN
Version 06 01.2010
chamber opening time
0 ms
Parameter can only be changed by a qualified service technician! ►
wet pressing
no
Appears only if the parameter pre-infuse is programmed higher then 00 ml!
Parameter can only be changed by a qualified service technician! ►
2 x grind quantity
14.0 g.
+
Appears only if the parameter dispensing mode is programmed to “double product”!
Range: 4.0 – 16.0 gram
Quantity of coffee powder (max.: 14.0 gr.; depending on the type of grind) ►
2 x initial pressure
level 1
Appears only if the parameter dispensing mode is programmed to “double product”!
Parameter can only be changed by a qualified service technician! ►
2 x delay pre-infuse
0.0 s.
Appears only if the parameter dispensing mode is programmed to “double product”!
Parameter can only be changed by a qualified service technician! ►
2 x chamber opening time
80 ms.
Appears only if the parameter dispensing mode is programmed to “double product”!
Parameter can only be changed by a qualified service technician! ►
2 x wet pressing
no
Appears only if the parameter dispensing mode is programmed to “double product”!
Parameter can only be changed by a qualified service technician! ►
Product buttons
►
product butions
► To access a menu, see “Programming overview: CHEF card”, page 23
select product
< press button >
BB
Select the desired product (for which the parameters are to be set) ►
select product
moccaccino
The product type can only be changed by a qualified service technician! ►
counted products
1
Parameter can only be changed by a qualified service technician! ►
Product buttons: Moccaccino (option powder doser)