Schaerer Coffee Art

www.schaerer.com
41
BASCA - EN
Version 06 01.2010
2 x chamber opening time
0.0 s.
Appears only if the parameter dispensing mode is programmed to “double product”!
Parameter can only be changed by a qualified service technician! ►
2 x wet pressing
no
Appears only if the parameter dispensing mode is programmed to “double product”!
Parameter can only be changed by a qualified service technician! ►
product buttons
product buttons
► To access a menu, see “Programming overview: CHEF card”, page 23
select product
< press button >
BB
Select the desired product (for which the parameters are to be set) ►
select product
hot water
The product type can only be changed by a qualified service technician! ►
counted products
1
Parameter can only be changed by a qualified service technician! ►
dispensing mode
start/stop
Parameter can only be changed by a qualified service technician! ►
product test
restart required
Product can only be tested by a qualified service technician! ►
water quantity
0.0 s
+
Range: 0.0 – 99.9 seconds
Duration of hot water output ►
product buttons
Product buttons: hot water