Schaerer Coffee Factory - Foamer Rinsing (Optional); Operating Options; Rinsing Interval; Warm-Up Rinsing

32
www.schaerer.com
User Manual SCF - EN
03.2010 / Edition 07
Software
Water hardness/capacity
On plumbed coffee machines with a constant water
supply (without water lter, optional), for the Aquaex
option and for coffee machines with a water tank, the
water hardness (carbonate hardness) is set here.
With tted lter and constant water supply or with
Aquaex option:
Filter capacity is set here.
(The water lter capacity can be found in the water lter
documentation.)
Warm-up rinsing
Whether the coffee machine should rinse out the
brewing unit with hot water after heating up is set here.
Recommended setting: active.
Foamer rinsing (optional)
Automatic foamer rinsing after the last beverage with
milk components is dispensed.
y e s / n o
Rinsing interval
The time elapsed between the last removal of
a beverage with milk in it and a foamer rinsing.
Recommended setting: 2 minutes.
Operating options
The following operating options are available.
Warm rinse pad (active / inactive) y
Barista pad (active / inactive) y
y Second level / toggle pad (active / inactive)
ON / OFF button (direct / via PIN) y
Menu pad (immediate / delayed) y
If customers serve themselves
then some functions can be
switched to inactive.
The pads will not be shown on
the ready to operate display.