www.schaerer.com Operation
48 / 68
Operating instructions / V07 / 06.2010
Preparing hot water (Siena 2)
The temperature indicator lights up in green.
► Place a cup under the hot water outlet.
► Press the
button. The dispensing procedure is stopped by pressing the button again.
► Remove the cup from under the outlet.
Preparing steam (Siena 1)
Not possible with the Siena 2!
► Place a cup under the hot water outlet.
► Turn the rotary dial (on the right-hand side) to the [ Steam ] position.
► To cancel the dispensing procedure, turn the rotary dial back to its starting position (centre).
► Remove the cup from under the steam outlet.
► Clean the steam wand with a paper towel.
If products have been heated or frothed, dispense steam for a brief period in order to clean the steam outlet
of residue.
Preparing cappuccino (Siena 2)
The dispensing procedure for cappuccino cannot be interrupted!
► Move the milk tube with the milk nozzle downwards into the milk container (refer to the picture).
► Place a cup under the outlet.
► Touch the cappuccino button. The product is dispensed.
► Remove the cup from under the outlet.
To prepare macchiato, follow the same instructions as for preparing cappuccino. The only difference
is that milk is poured into the cup before the dispensing procedure and the time-out between the
dispensing of milk and coffee is longer.
Preparing milk foam (Siena 1)
Milk foam can be dispensed and/or added at any time.
► Unscrew the screw.
► Fit the foam nozzle to the steam outlet. Retighten the screw.
► Place a cup under the steam outlet.
► Place a cup under the steam outlet. Turn the rotary dial (on the right-hand side) to the [ Steam ] positi-
on.
► To cancel the dispensing procedure, turn the rotary dial back to its starting position (centre).
► Remove the cup from under the outlet.
After dispensing milk foam, dispense some steam for a short period in order to clean the foam nozzle and
the outlet of milk remains.
► After dispensing foam, clean the foam nozzle under warm, running water.