Schaerer Siena 1 - Overview: Product Programming (Coffee, Cappuccino)

www.schaerer.comProgramming
Operating instructions / V07 / 06.2010
51 / 68
Overview: product programming (coffee, cappuccino)
Accessing the programming level:
Ready
► Press to access the programming level.
Product, 2x, C
Siena 1 + 2: Press button [ 1 ] or [ 2 ] (see page 51)
+ 0% ##
► Set the water volume (ml) using or .
► Conrm by pressing
.
+ 0% #.## s
► Set the coffee quantity (grinding time) using or .
► Conrm by pressing
.
Pre-brewing ON
► Switch pre-brewing on or off using or .
►Confirm by pressing
.
Ready
End of product programming.
Siena 2: Press button [ 3 ](see page 52)
+ 0% ##
► Set the water volume (ml) using or .
► Conrm by pressing
.
+ 0% #.## s
► Set the coffee quantity (grinding time) using or .
► Conrm by pressing
.
Pre-brewing ON
► Switch pre-brewing on or off using or .
► Conrm by pressing
.
+ 0% #.## s
► Set the milk volume (sec.) using or .
► Conrm by pressing
.
Milk ► Coffee
► Change the dispensing order using or .
► Conrm by pressing
.
Ready
End of product programming.