EasyManua.ls Logo

Schaudt CSV 416 - Battery Selector Switch; Setting the Battery Selector; System Startup Procedure; Initial System Activation

Schaudt CSV 416
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions Caravan-charging system CSV 416
6
Date: 30.05.2021 8050111 BA / EN
Proceed as follows for a battery change:
" Disconnect the battery from the caravan charging system by switching
themain12Vswitchoff.
" Disconnect the caravan charging system from the 230 V supply.
" Unhitch the caravan from the towing vehicle.
" Replace the battery.
" After changing the battery, recheck which type of battery has been inser-
ted.
Y DANGER!
Incorrectly setting the battery selector switch poses a risk of explosion (by
the formation of detonating gas). Move the battery selector switch to the
correct position
1 2
Fig. 1 Battery selector switch
"
Move both battery selector switches (Fig. 1, Pos. 1) to the correct posi-
tion using a thin object (e.g. a ballpoint pen):
Battery type
Switch 2/1 Switch B/A
Lead-acid batteries 2 B
Lead-gel batteries / AGM 1 batteries 2 A
AGM 2 batteries 1 B
Lithium batteries 1 A
" Start up the system as described in Section 3.1.
Changing
the battery
Starting up

Related product manuals