12
Schbot
Android System:
Requires Android 4.3 or later.
1. Open the App “iGLASSBOT” as Fig. 1.
2. Turn the switch on of Wind X2 and put it onto glass.
3. Use the App to search Wind X2, it will get the hotspot of Wind X2
.
4. Tap the hotspot(CleanRobot XXXX, the App will be paired with Wind
X2, then enter into the control panel of App as Fig. 4.
5. Use App to control the robot.
* T
he interface may be different from the actual interface due to improvement,
please subject to the actual products.
Maintenance
1. After each cleaning, wash the cleaning pads and dry them for future
use.
2. Clean the belt with soft and damp cloth, then dry it.
3. Wipe the air inlet regularly.
Fig. 1 Fig. 2 Fig. 3 Fig. 4
To Next Page
Loading...