EasyManua.ls Logo

Schbot Robotics Wind X2 - Page 5

Schbot Robotics Wind X2
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manufacturer can not take any responsibilities for any damges or injuries
caused by improper use.
Warning
Check if the safety rope and extension cable are broken or not before
use.
Fasten the safety rope and tie it to indoor fixtures before using Wind X2.
Set danger warning area downstairs for no-balcony window and door.
Battery shall be charged (Green light is on on the robot) before use.
Do not use it on rainy or moist days.
Switch power on before you put device onto glass.
Make sure Wind X2 can stick and stand on glass surface while put onto
glass.
Make sure to put the cleaning pad on the bottom of Wind X2 correctly
to avoid water leakage.
Do not spray or pour water onto Wind X2 and adapter.
Keep hair, loose clothing, fingers and all parts of body away from the
openings and moving parts.
Do not use in areas with existed flammable or combustible liquids, gas.
Please fully charge(About 1-2 hrs) and turn off Wind X2 and place it
in a cool and dry place if you do not use it for a long time. Charge it
every 3 months at least to avoid battery dead.
Please turn the switch on when you are going to Wind X2, so that you
can check the status of indicator.
3
Schbot