5 – FUNCTIONING AND USE COD.60M12/24.A.2018
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
35
7. After 2-3 minuts switch on the Pump 2 by
turning Pump 2 selector counterclockwise.
8. Switch off Pump 1 by turning counterclocwise
the Pump1 selector.
9. Leave the system working for 2-3 minuts and
then switch on the Pump 1 by turning Pump
1 selector counterclockwise
10. Switch off both pumps
11. Switch off the by-pass mode by turning
counterclocwise the by-pass selector.
The green light of the START button will
switch off.
12. Turn clockwise the Pump1, Pump 2 and Aut.
Washing selectors and close the
depressurization valve (lever in vertical
position).
To Next Page
Loading...
