THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
16
4. OPERATION
4.1 General criteria
Place the machine on the stern of the boat, possibly quite close to the waterline of the boat.
The maximum recommended height from the sea surface for the placement of the watermaker group is 1.5
meters. The best locations are:
• The stern platform
• The boat cockpit
ATTENTION
The external surface of motor of the pump can reach high temperatures; therefore, it is
recommended to avoid possible contacts with inflammable liquids and materials.
ATTENTION
The watermaker is equipped with anchoring systems to prevent damage during use
4.2 Hoses
Be sure to firmly secure the inlet and the discharge hoses; they should be submerged in the sea at an
appropriate distance from each other.
WATERMAKER PLACEMENT
FIG. 4-1
To Next Page
Loading...
