Schenker WIKI - Page 27

6 – MAINTENANCE (ROUTINE AND SPECIAL) REV.02
EN
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
26
5. Start the watermaker
6. Leave the unit running for approx. 20 minutes,
checking that the hoses are properly positioned in
the recipient, in order to avoid inhaling air.
7. Stop the unit and connect the original hoses.
CAUTION
It is necessary to perform the first start-up procedure when restarting the plant after a shutdown
procedure, in order to purge the air and drain out chemicals in the systems.