Schenker ZEN 100 User Manual

3 – PRESENTATION OF THE PRODUCT COD.30Z12/24.B.2021
3 – PRODUCT PRESENTATION COD: 150Z24.B.2021
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
16
3.8.3 Accessories
The main accessories of the watermaker are the following:
• Active carbon filter
• Electrovalve (or solenoid valve)
• Non-return valve (or check valve)
• Mesh filter (strainer)
ACCESSORIES
FIG. 3-9
Non-return valve
Active carbon filter
Mesh filter (strainer)
Electrovalve
Active carbon filter. This filter is connected between the fresh water pressurized system of the boat and the
electro valve on the filter holder. A manual valve positioned on the filter inlet allows replacement of the cartridge
without depressurizing the fresh water system of the vessel.
Electrovalve (or solenoid valve). It has the function of switching from seawater intake to fresh water tank
when washing the watermaker.
Non-return valve (or check valve). It stops water flowing out of the inlet hose. It must be installed vertically.
It stops leaking of fresh water from the seacock while the washing procedure starts.
Mesh filter. The machine is equipped with a strainer to protect the pump from macro sediments. This is placed
between the seacock and the pump.

Schenker ZEN 100 Specifications

General

Brand	Schenker
Model	ZEN 100
Category	Boating Equipment
Language	English