THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
6
2.4 Identification of the unit
The Zen Watermaker can be identified by a serial number printed on the top valve of the unit.
Serial number
Fig. 2-1
2.5 Legislative reference
2.5.1 Directives and standards concerning machine safety
• Machinery Directive 2006/42 / EC, in force since December 29, 2009;
• Low Voltage Directive 73/23 / EEC and subsequent amendments and additions: 93/68 / CEE
implemented by the Law of 18 October 1997 n. 791.
• Electromagnetic Compatibility Directive 89/336 / EEC and subsequent amendments and additions:
93/31 / CEE implemented with D.L. December 4, 1992 n. 476.
• Standards UNI EN 292/1 and 292/2 (safety of machinery);
2.5.2 Respect for the environment – requirements for removal and disposal
ATTENTION
Removal and disposal of materials, as result of the decommissioning of the machine, must be
performed in accordance with the regulations in force, for the safeguard and protection of the
environment.
According to removal and disposal, it should be highlighted that the construction materials of the machine are
not dangerous for the environment and consist essentially of:
- Stainless Steel;
- Plastic;
- Carbon fibre;
- Motors, cables and consumable electrical materials;
- Rubber and polyurethane seals.
To Next Page
Loading...
Need help?
General
