Schenker ZEN 100 User Manual

6 – MAINTENANCE (ROUTINE AND SPECIAL) COD: 150Z24.B.2021
EN
THE PRESENT MANUAL BELONGS TO - Schenker Italia - ALL RIGHTS RESERVED
38
5. Manually start the watermaker through the
microswitches inside the pump box (switch
down)..
6. Leave the unit running for approx. 20 minutes,
checking that the hoses are properly positioned
in the recipient, so that to avoid inhaling air.
7. Manually stop the unit through the
microswitches inside the pump box (switch up)
and connect the original hose.
CAUTION
It is necessary to perform the first start-up procedure when restarting the plant after a shutdown
procedure, in order to purge the air and drain out chemicals in the systems.

Schenker ZEN 100 Specifications

General

Brand	Schenker
Model	ZEN 100
Category	Boating Equipment
Language	English