Scheppach DC500 Translation Of The Original Operating Manual

www.scheppach.com
16
|
GB
2. Device description
1. Retaining rod
2. Filter bag
3. Housing cpl. with engine
4. On/o󰀨 switch
5a. Side panel right
5b. Side panel left
6. Extraction hose
7. Wheel
8. Hose coupling
9. Floor plate
10. Dust bag
11. Clamp tting
12. Adapter set
13. Intermediate plate
14. Hose clamp
15. Washer
16. Split pin
17. Fillister head screw M5x16
18. Fillister head screw M5x30
19. Hexagonal nut M5
3. Scope of delivery
• Housing cpl. with engine
• Floor plate
• Side panel right
• Side panel left
• Intermediate plate
• Extraction hose
• Filter bag
• Dust bag
• Retaining rod
• Clamp tting
• Wheel (2x)
• Hose coupling
• Adapter set (4-piece)
• Hose clamp (2x)
• Washer (2x)
• Split pin (2x)
• Fillister head screw M5x16 (12x)
• Fillister head screw M5x30 (4x)
• Hexagonal nut M5 (4x)
• Operating manual
4. Proper use
The machine complies with the applicable EC
machinery directive.
• The machine has been built according to the state-
of-the-art and the technical safety requirements.
Nevertheless, its use may cause danger to the life
and limb of the user or third parties, or damage to
the machine and other material assets.
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Failure to comply with the operating instructions
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specied
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manual
before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the
device, for avoiding danger, for minimising repair
costs and downtimes, and for increasing the reliability
and extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations
applicable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect
it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

Scheppach DC500 Specifications

General

Cleaning type	Dry
Product color	White
Housing material	-
Input power	550 W
Capacity	75 L
Hose length	2 m
Hose diameter	100 mm
Airflow (high speed)	1150 m³/h

Weight and Dimensions

Depth	750 mm
Width	460 mm
Height	420 mm
Weight	16000 g