What to do if Scheppach HL460 Log Splitter fails to split logs?
If your Scheppach Log Splitter isn't splitting logs, here are a few potential causes and solutions: * **Improperly positioned log:** Make sure you are loading logs correctly. * **Oversized log:** Reduce the log size to fit within the machine's capacity. * **Blunt wedge:** Sharpen the cutting edge of the wedge. * **Oil leaks:** Locate the leak(s) and contact your dealer.
What to do if Scheppach Log Splitter has oil leaks around the cylinder ram?
If you notice oil leaks around the cylinder ram or from other points on your Scheppach Log Splitter, consider these potential causes and solutions: * **Air sealed in hydraulic system:** Loosen the bleed screw a few rotations before operating the log splitter. * **Loose bleed screw:** Ensure the bleed screw is tightened before moving the log splitter. * **Loose oil drain screw:** Tighten the oil drain screw firmly. * **Worn valve assembly/seals:** Contact your dealer.
General| Splitting Force | 4 tons |
|---|---|
| Hydraulic Oil Capacity | 5 L |
| Weight | 70 kg |
| Motor Power | 2.2 kW |
| Voltage | 230 V |
| Power | 2200 W |
To Next Page