www.scheppach.com
GB
|
23
7. Technical data
500 mm
520 mm
59 kg
Motor 64 kg
Input P1 230 V~ / 50 Hz
Output P2
Splitting Power S3 25%
7 t
370 mm
3,08 cm/sec
5,29 cm/sec
Operating pressure 3,5 l
Motor speed 208 bar
Drehzahl 2800 1/min
Noise
m Warning:
please wear suitable hearing protection.
Characteristic noise emission values
sound power level L
sound pressure level L
pA
3 dB
of the starting process on the motor heating. Identical
25% of the running time.
Pressure:
reachable pressure level.
8. Unpacking
• Open the packaging and remove the device care
•
6. Additional safety instructions
•
son.
• Never split logs containing nails, wire, or other for
•
ous. You can stumble, slip or fall down. Keep the
•
hands on moving parts of the machine.
•
Warning! This electric tool generates an electro
pair active or passive medical implants under cer
tain conditions. In order to prevent the risk of serious
manufacturer of the medical implant prior to operat
ing the electric tool.
Remaining hazards
The machine has been built using modern tech-
nology in accordance with recognized safety
rules. Some remaining hazards, however, may
still exist.
•
ed.
•
•
connection leads are used.
•
still be present.
•
the chapter Authorized use and in the entire oper
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
•
• Avoid accidental starts of the machine: Do not
press the start button while inserting the plug into
the socket.
•
•
the machine is running.
To Next Page
Loading...
