Scheppach HL760LS - 10. Initial Operation; Preparation and Startup Checks; Splitting Logs and Operation

www.scheppach.com
28
|
GB
17. Troubleshooting


Problem Possible Cause Remedy
Motor stops starting
Overload protection device
disengaged to protect the log splitter
from being damaged

Fails to split logs


loading

the machine

 Sharpen cutting edge
Oil leaks 

taking unfamiliar noise or
vibrating a lot





ram or from other points

operating

operating the log splitter
Bleed screw is not tightened before
moving the log splitter
Tighten bleed screw up before moving the log
splitter
Oil drain screw loose 


