Scheppach HS120 - Page 5

5
• Use only original Scheppach accessories, wearing or re-
placement parts. You can find replacement parts at your
Scheppach dealer.
• When ordering, include our item number and the type
and year of construction of the machine.
1. On/off switch
2. Longitudinal stop
3. Saw blade
4. Protective cover
5. Extraction hose
6. Riving knive
7. Stage centre
8. Table extension
9. Sliding table
10. Wheel kit
11. Extraction connection piece
12. Transport handle
13. Height adjustment wheel
HS120
Delivery status
Circular Saw Bench HS120
Longitudinal stop with angle bar
Cross-cutting jig
Saw blade cover with screw and wing
nut
Splitting wedge
Shift rod
Bench extension
2 Bench extension supports
2 Wheel and plate units
Saw blade ø 315 x 30 x 3,0/2 24 Z
Saw blade key
Push stick
Extraction hose and fastening clamp
Accessories kit
Manual
Technical data
Dimensions L x
W x H
1110 x 600 x 1050 mm
Size of bench
800 x 550 mm
Size of extended
bench
950 x 800 mm
Height of bench with
base frame
800 mm
ø Saw blade
315 x 30 x 3,0/2 24 Z
Height adjustment
90°/45°
0–83/0–49 mm
Displacement
90°–45°
Cutting speed m/sec
46
Longitudinal stop
580 mm
Weight
48 kg
Drive
Motor V/Hz
230 V/50 Hz 400 V/50 Hz
Performance input
P1
2200 W 2800 W
Operation mode
S 6/40 % S 6/40 %
Number of
revolutions
2800 1/min 2800 1/min
Motor protection
yes yes
Undervoltage
cutback
yes yes
Connector
TYP I
CEE 16 A
Stecker
Schuko
CEE 16 A
Subject to technical changes!
1110
78
12 13
1
236
9
45