www.scheppach.com
GB
|
25
• Places where the connection cables have been cut
due to being driven over.
•
outlet.
• Cracks due to the insulation ageing.
Such damaged electrical connection cables must not
be used and are life-threatening due to the insulation
damage.
Check the electrical connection cables for damage
Ensure that the connection cables are dis-
connected from electrical power when checking for
damage.
-
cables of the same designation.
12. Cleaning
• Keep protective devices, air vents and the motor
housing as free of dust and dirt as possible.
compressed air at low pressure.
•
• Clean the device at regular intervals using a damp
cloth and a little soft soap.
parts of the device.
penetrate the device interior.
tool will increase the risk of electric shock.
13. Storage
frost-free place that is inaccessible to children. The op-
Store the power tool in its original packaging. Cover the
power tool to protect it from dust or moisture. Store the
operating manual with the power tool.
14. Maintenance
-
tor (b) from the spark plug.
Tip:
for a few seconds when using electrical equipment that
requires a high starting current, such as a compressor or
submersible pump.
ATTENTION!
•
•
Operating display (5)
running.
Oil warning indicator (7)
The oil warning indicator (7) activates when the oil level
is too low and deactivates as soon as the oil level is
Tip:
-
Top up with oil and start again.
Eco mode - energy-saving switch (9)
•
thus saving fuel.
• Push the en-
position.
Note: Never preselect the modes while the genera-
tor is in operation.
11. Electrical connection
for operation. The connection complies with the appli-
The customer‘s mains connection as well as the ex-
-
ulations.
Damaged electrical connection cable
The insulation on electrical connection cables is often
damaged.
• Pressure points, where connection cables are
passed through windows or doors.
• Kinks where the connection cable has been improp-
To Next Page
Loading...
