CDR Positioning B1051044 Rev. B
7
2.6. Universal Bitewing Tab Holder
REFERENCE
This tab is color-coded BLUE. As an example, tab
placement on a CDR wired Sensor sheath is shown below.
Placement on wireless Sensor sheaths is identical.
ILLUSTRATION
Placing Bitewing Tab on
Sheath (Horizontal) (Step 3)
Placing Bitewing Tab on
Sheath (Vertical) (Step 3)
USAGE
1. Place the sheath on the Sensor, following the steps for
either wired (Table 1) or wireless (Table 2) Sensors.
2. Select bitewing tab and remove protective strip from
adhesive.
3. For vertical bitewings, place bitewing tab vertically on
the sheath in the center of the Sensor. For horizontal
bitewings, place bitewing tab horizontally on the
sheath in the center of the Sensor.
4. Position Sensor in patient's mouth. Make other X-ray
head or positioning instrument adjustments as needed.
When ready, take X-ray.
5. Reposition tab if required.
6. Dispose of tab and sheath at the end of this patient's
exam.
To Next Page
Loading...